Heterogeneous structure of silk fibers from Bombyx mori resolved by 13C solid-state NMR spectroscopy

The molecular conformation of silk fibrion is characterized by solid-state 13C NMR before spinning (silk I structure) and after spinning (silk II structure). We compare native silk fibers with the quasi-crystalline Cp-fraction and a synthetic model peptide (Ala-Gly)15, both of which can be converted either into silk I by dialysis from 9 M LiBr or into silk II by treatment with formic acid. Our results demonstrate that silk II fibers are intrinsically heterogeneous, consisting of beta-sheets, distorted beta-turns, and distorted beta-sheets. This higher-order heterogeneity is revealed by the 13C-NMR Cbeta-peak of Ala, indicating that the Ala side chains are stacked partially in parallel and partially face-to-face, at a ratio of 1:2.     

Surface derivatization of poly(p-phenylene terephthalamide) fiber designed for novel separation and extraction media

The surface derivatization of poly(p-phenylene terephthalamide) fiber was studied. The obtained surface-derivatized filaments were packed into a fused-silica capillary to evaluate its surface characteristics by using GC. As the stationary phase for GC the surface-derivatized fibers showed higher retention for alkanes and alkylbenzenes than that with the untreated Kevlar fiber. The improvements on the retention power and the peak shape were observed on the benzyl-modified fibrous stationary phase. The derivatized fibrous materials were also evaluated as the extraction medium in fiber-in-tube SPE, and the effect of the surface modification on the extraction power was compared to the parent fiber. The results indicated that the modified fiber possessed a higher extraction power than the untreated fiber. Based on the facts, the successful modification of the fiber surface was estimated.     

Purification of enzymes by high-speed gel filtration on TSK-GEL SW columns

The purification of enzymes was investigated by high-speed gel filtration on TSK-GEL G3000SWG columns packed with porous silica gel deactivated by chemically bonded hydrophilic compounds. Crude β-galactosidase from bacterial cells and commercial urease were purified ca. 15-fold in a single gel filtration. These enzymes were eluted within an hour from the column and the recoveries of enzymatic activity were almost 100% although the operation was carried out at room temperature (22°). Samples up to 100 mg could be applied to the column without loss of separation efficiency.     

High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

Highly regio- and stereoselective hydrometallation reactions of fluorine-containing internal alkynes: Novel approaches to fluoroalkylated alkenes

Hydroalumination, hydrocupration, and hydroboration reactions of various fluorine-containing alkynes were investigated. The alkyne reacted smoothly with 2.0 equiv. of Red-Al at −78 °C to give the hydroaluminated adduct in a highly regio- and stereoselective manner, which was treated with iodine, the corresponding vinyliodide being produced in moderate yield. Hydrocupration of the alkynes also took place, but the resulting vinylmetal reacted with various electrophiles sluggishly. In sharp contrast, the reaction with dicyclohexylborane proceeded smoothly to afford the cis-addition products preferentially, which were subjected to Suzuki-Miyaura cross-coupling reaction, leading to trisubstituted alkenes in high yields.     

Highly Selective Separation of Rhodopsin from Bovine Rod Outer Segment Membranes Using Combination of Divalent Cation and Alkyl(thio)glucoside

The micellization process of bovine rod outer segment (ROS) membranes is investigated utilizing a series of neutral detergents. It is found that when alkyl(thio)glucosides with an appropriate hydrophilic–lipophilic balance (e.g. octylthioglucoside) are used in combination with a divalent cation, rhodopsin is selectively extracted from ROS membranes at a specific detergent-to-membrane ratio. This allows remarkable purification of rhodopsin by a single-step solubilization, because the residual membranes are heavily aggregated in the presence of divalent cation and are therefore easily sedimented by low-speed centrifugation. The absorption spectrum of the supernatant reproducibly exhibits an A₂₈₀/A₅₀₀ value of 1.6, an excellent value that could rarely be obtained by chromatographic purification. The degree of purification also depends on the type of divalent cation included in the solubilization solution; specific binding of IIB-series cations (Zn²⁺ and Cd²⁺) to ROS membranes is suggested to play an important role in the solubilization process. The present result represents a unique example of selective solubilization of a specific membrane protein from highly aggregated membranes.     

Chemistry of the neopolyoxins,pyrimidine and imidazoline nucleoside peptide antibiotics

New chitin synthetase inhibitors, neopolyoxins A, B, and C were isolated from the culture filtrate of Streptomyces cacaoi subsp. asoensis. Their absolute structures have been established on the basis of chemical and spectroscopic evidence. They are structural analogs of the polyoxins. As a nucleobase, neopolyoxin C possesses uracil, while neopolyoxins A and B contain the imidazoline moiety. A ring contraction reaction of pyrimidine nucleoside into imidazoline nucleoside played a key role in the structure determination of the nucleoside moiety. A similar transformation was suggested for the biosynthesis of neopolyoxins A and B.     

Coating and water permeation properties of SiO2 thin films prepared by the sol-gel method on nylon-6 substrates

Nylon-6 substrates were coated with SiO₂ thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films on the substrates. The thin films strongly adhered to the substrates. The water permeability coefficients of nylon-6 substrates coated with these thin films decreased with the increase in the ratio of TEOS to the total alkoxides. The pretreatment of the nylon-6 substrates with -aminopropyltriethoxysilane was found to be effective to suppress the water permeability. The water permeability was suppressed by about 40% under the optimal condition.     

Nitrosation of Phenolic Substrates under Mildly Basic Conditions: Selective Preparation of p-Quinone Monooximes and Their Antiviral Activities

Nitrosation of 3-methoxyphenol and 1-naphthol were examined under both acidic (NaNO(2)-EtCO(2)H-H(2)O) and basic (i-AmNO(2)-K(2)CO(3)-DMF) conditions. Acidic nitrosations afforded ortho-directed products, whereas para-directed nitrosations were observed under basic conditions to yield p-quinone monooximes. The basic para-directed nitrosation was further examined using 15 phenols, two naphthols, and four phenolic heterocyclics. A one-pot operation of the basic nitrosation followed by methylation with dimethyl sulfate gave the corresponding methyl ethers in high yield. Two p-quinone monooximes derived from 3-methoxyphenol and 8-hydroxyquinoline showed a moderate activity against HSV-1, and the latter oxime was also effective against HSV-2. On the other hand, p-quinone monooximes derived from methyl salicylate, 1-naphthol, 7-hydroxy-2-methylbenzo[b]furan, and 8-hydroxycoumarin showed the comparable activity to that of DDI against HIV-1.     

Generation of 6-(Trifluoromethyl)-4,5-dihydro-2(3H)-pyridone and the Application to Synthesis of Some Fused Nitrogen Heterocycles Carrying a Trifluoromethyl Group on the Bridgehead Position via Radical Cyclization of Dihydropyridones

Staudinger/aza-Wittig reaction of 6,6,6-trifluoro-5-oxohexanoyl azide with PPh(3) or PBu(3) was examined. A reactive intermediate acyl imine 1 was trapped by methanol. Without nucleophile, isomerized enamide form 3 was obtained. N-Iodobenzoylation and N-haloalkylation of 3 and following radical cyclization via the 5-exo or 6-exo mode gave benzoindolizidinone, indolizidinone, and quinolizidinone derivatives 10-14, which have a trifluoromethyl group at the bridgehead position adjacent to nitrogen. Although LiAlH(4) reduction of 10 and 11 gave a mixture of saturated benzoindolizidine 15 and amino alcohol 16, reduction with BH(3)/THF selectively gave the desired 15 and indolizidine 17 from 13.